Sealing of seams, joints, connections
Sealing of ventilation pipes, rubber hoses, covering films
Packaging and securing of cargo and minor repairs in everyday life.

PURPOSE

1. The surface to which the tape is to be applied must be clean, dry and degreased. The presence of dust, dirt, oil or moisture will significantly reduce the adhesion of the tape and shorten its service life. Wipe the surface with a degreaser before applying the tape, we recommend using the SANFIX Universal Cleaner (art. 40719). Rough surfaces should be pre-cleaned.
2. Correct tension: do not apply the tape too loosely or too tightly. Weak tension can lead to the formation of folds and a decrease in the strength of the connection. Strong tension can lead to deformation of the tape and its premature peeling. Stretch the tape evenly, ensuring a tight fit to the surface.
3. Start gluing the tape from one edge, gradually smoothing it over the surface. Avoid sudden movements so as not to damage the tape and not create air bubbles. If bubbles do form, carefully roll them with a rubber roller or a flat smooth surface.
4. The optimum temperature for working with reinforced tape is from +18°C to +25°C. At low temperatures, the glue may lose its properties, and at high temperatures, it may dry out too quickly.

METHOD OF APPLICATION